MIG (GMAW) wires

TIG welding rods

SAW wires

Gas welding rods

Packaging units, coil types

PITEC products

Home / Products / MIG (GMAW) wires / ED-FK800

ED-FK800
MIG (GMAW) wires for high strength structural steels (NiCrMo)

Classification DIN EN ISO

16834-A G 69 6 M21 Mn4Ni1,5CrMo

Material No.

-

Classification AWS

A5.28 ER110S-G, ~A5.28 ER100S-1

Approvals

TÜV 10268, DB 42.045.18, ABS, BV, LR, RINA, RS, DNV, CE, VG 95132

Characteristics and application

MIG/GMAW wire for welding high strength low alloy steels. Used for welding high strength steels in many high stress, critical applications; also exhibiting excellent toughness down to -60°C. Typical applications can be found in crane construction, mining, shipbuilding, automotive and pressure vessel industries.

Base materials

For high strength fine-grained structural steels up to yield strength 690MPa (100ksi).
S500Q-S690Q, S500QL-S690QL, S500QLN-S690QLN, P500Q-P690Q, P500QL1-P690QL1, P500QL2-P690QL2, S770QL
ASTM A514 Steel Grades
EH62, EH69

Typical analysis in %

C: 0,09
Si: 0,55
Mn: 1,67
Cr: 0,25
Ni: 1,60
Mo: 0,50
Ti: 0,07

Yield strength in Mpa

≥ 720

Tensile strength in Mpa

≥ 790

Elongation in %

4d/5d: ≥17

Charpy-V-Value (ISO-V) in J

RT ≥ 100
-60°C ≥ 47

Typical heat treatment

Welding procedure, including preheat temperature, interpass temperature and PWHT, will be dependent on the base material being welded and any applicable design codes.

Other products

MIG/GMAW: ED-FK 850, ED-FK1
TIG/GTAW: WSG FK1

Contact us

Hermann Fliess & Co. GmbH
Essenberger Straße 91
47059 Duisburg, Germany
Phone: +49 203-31908-0
Fax: +49 203-31908-90
E-mail: info@fliess.com

To our contact page