14700 S Fe8
1.4718
-
-
MIG/GMAW wire for hardfacing. The wire is predominantly used for applications requiring good abrasion resisitance such as mixers, crushers and earth moving equipment but deposits will withstand moderate impact. With final deposit hardness being nominally 60HRC the weld metal can only be ground. If very thick build-ups are required it is suggested that lower hardness wires (eg. ED-A 35) be used as a buffer layer.
57-62 HRC
C: 0,45
Si: 3,00
Mn: 0,40
Cr: 9,50
-
Weld procedure requirements dependent on material being surfaced.